Tecno For knowledge

For most people, the cooling standard with the PC has been deemed sufficient. but how with mania that forced the PC processor overclock its work until the threshold ability? Im sure they will feel less cooling performance standard with PC and look for better cooling / cooler. Or how about a notebook that requires the system to save power that he used? In addition to the low-power processors, notebook cooling fan which also apply to work as needed. PC cooling technology is also evolved over the task of facilitation of processor. But it does not sepesat processor technology development itself. this is because for normal conditions, the use of standard cooling technology is sufficient to cool processor. Broadly speaking, this type of cooling system can be divided into three, namely the cooling system air, water cooling systems, and peltier. 

This cooling system is the oldest in the world of PC and still used to date. This system dominates the cooling system on the PC because of its simplicity and lower cost. though This system also has some drawbacks, one of which is very noisy. Air conditioning system consists of 2 pieces of components, namely heatsink and fan. Heatsink is useful to absorb the heat on processor. Blades, the blade is useful for transporting heat processors to the surrounding air. While the fan heatsink is useful to describe the heat to the surrounding air by faster. That is why the heatsink-bladed blades designed to make it easier for distribution of heat to the surrounding air. 

The system uses water to absorb heat in the heatsink. The principle works like with the system on a car radiator. On processor installed water block that contains many strip of copper / aluminum serving like a heatsink, which absorbs heat processor. But the planks are laid in a block that contains water. On this block there are two channels, one for incoming water and the other to exit the water. Well, the heat in the blades of the heatsink is absorbed by water then thrown out into the water block reservoir or reservoir water through the hose water. The water is then cooled with fan contained in the coolant reservoir. Water in a reservoir that has been chilled and then pumped by a miniature electric water pump out reservoir through a water hose and then enter to block the water to replace water that has been circulating cool the heatsink. So this water circulates cool the heatsink, then back out into the water reservoir which is then This heat will be cooled by a fan. Because the distance between the blocks with the reservoir water can be flexible with the distance as far as 3 meters, this means no fan motors in the PC. Reservoir cooling fan motors and water pumps mini electric can be placed separately from the PC. This makes the system more silent PC. 

It is a system that does not cool the system, but only transfers heat from one end to the other. Difference in temperature between the hot end to cold end can ranged from 70 degrees to 120 degrees. Peltier cooling works on the principle of pumping hot work using very much power. This cooling system can use 80 to 130 watts of power to be able to work. While the peltier system itself also generates so that heat is also required heatsink and fan for peltier system. So if we add the the overall system temperature, then the use of peltier system will be more heat. But the temperature at processor can be as cold as the temperature of our refrigerator. Technically the use of peltier system is ideal because it can move the processor heat out the system well and fast PC, but it also brings many problems peltier & hazards, such as overheating if the fan is dead who will burn the processor, electrical problem because the peltier using too much power, condensation / condensation that occurs due to an extreme difference between the temperature of the processor that is cooled by ambient temperature. To more information, you can read it in www.peltier-info.com. Once we understand some of the above cooling technology, we can use technology cooling at the top to build computing systems with an appropriate cooling system. Here is an example of its application. 

Related Posts : 1, cooling, importance, of, page, processor